|
|
Yes, the new CNC “precision crafted”
Black Widow longbow is as fast and sweet to shoot as a Black Widow recurve.
You just may fall in love with this long, lean and lovely lady with just
enough curves to turn on any red-blooded bowhunter. Even though she appears
very slim and delicate, she packs a powerful punch. In fact, she zings a
heavy arrow as fast as our recurves.The locator grip provides positive and
consistent hand placement, yet has a traditional appearance. Most Black
Widow recurve shooters can pick up this longbow, grip it by the throat just
like they do their recurve and immediately hit where they look without having
to make adjustments. In fact, the PSR recurve has exactly
the same grip and riser as this longbow. This makes it unbelievably
easy to switch back and forth between these two bows. You have to shoot this bow to believe it! (See our
TEST DRIVE ) Available in a one-piece or takedown version. (See photo below.)
- FAST FLEX TRAPEZOID LIMBS:
60”, 62", 64" and 66”. Vertically stacked, tapered
laminations reinforced with a red, woven glass center core. Faced and
backed with transparent Fiberglass with a veneer lamination and carbon
under the back glass. Flemish-twist DynaFLIGHT 97 string.
- RISER: Deflex design. Pre-stressed,
multiple layers of laminations on the face side of trim stripe
and reinforced with pre-stressed, multiple layers of fiberglass
on the back side of trim stripe that extend into the fadeouts.
Tapered 2 3/4 inch sight window cut to center. Radiused shelf.
Black Widow spider medallion inlay.Shur-Grip rubber handle wrap
that can easily be rolled off or on, as preferred.
- BRACE HEIGHT:
7 to 7 3/4 inches (from string to throat of grip).
- MASS WEIGHT:
1 3/4 pounds for 64" bow.
- FINISH: Sealed
and protected in nonreflective “Frost” (matte) clear marine
epoxy.
|
MODEL PL X ONE-PIECE or TAKE-DOWN
LONGBOW:
X stands for “Exotic”! We can build
your X bow with one of several exotic woods of your choice This MAY require
some planning and discussion. If you have questions, please call us for details.
|
Shown with optional tailored Beaver Tail handle wrap |
Reinforced
tip overlay |
|
PL
Series
Recommended Limb Lengths
(draw measured from string to far side of shelf |
23"
to 27" Draw - 60" Limbs |
| 25" to 29"
Draw - 62" Limbs |
| 27" to 31"
Draw - 64" Limbs |
| 29"
to 33" Draw - 66" Limbs |
| At your draw length you may decide to
opt for the shorter limb that is a little more maneuverable or for
the longer limb that is slightly more comfortable. The decision is
yours. |
|
|
|